It’s been a long time coming, but here is PAR test data from our lab. The data was taken in open air on our in-house scanning system. We used a Apogee Instruments Model SQ-110 Quantum Meter with data points every 0.25 inch.

The distance from the bottom of each light is 19 inches.

AI LED Module
AI LED Module
The Module was ran at 100% on both white and blue emitters, consuming roughly 74W from the wall.

250W Metal Halide
250W Metal Halide
The metal halide setup consisted of a Phoenix 14000K 250W Double Ended bulb, in a Sunlight Supply LumenMax 3 Reflector, with a Sunlight Supply Galaxy 250W electronic ballast. This setup consumed just shy of 280W once warmed up.