We updated web servers a few months ago, and some of our image paths were broken. Back by popular demand…
Also – check out Dr. Sanjay Joshi’s article in this month’s Advanced Aquarist where he tests the AI LED Module in a similar fashion as we did.
It’s been a long time coming, but here is PAR test data from our lab. The data was taken in open air on our in-house scanning system. We used a Apogee Instruments Model SQ-110 Quantum Meter with data points every 0.25 inch.
The distance from the bottom of each light is 19 inches.
AI LED Module
The Module was ran at 100% on both white and blue emitters, consuming roughly 74W from the wall.
250W Metal Halide
The metal halide setup consisted of a Phoenix 14000K 250W Double Ended bulb, in a Sunlight Supply LumenMax 3 Reflector, with a Sunlight Supply Galaxy 250W electronic ballast. This setup consumed just shy of 280W once warmed up.
